Interlight

SMART CITY & HOME

October 21-24, 2025 | Moscow | Crocus Expo IEC
new name | new dates | new location

Interlight

SMART CITY & HOME

October 21-24, 2025 | Moscow | Crocus Expo IEC
new name | new dates | new location
Аrlight
High quality LED equipment and related materials. In the range of Arlight: LED strips, aluminum profile, power supplies, LED fixtures, lighting control equipment, flexible neon, LED modules, LEDs.
Arlight products are used to solve a wide range of problems: - lighting of residential and public interiors, - production of advertising products, - creation of architectural illumination of buildings, - lighting accompaniment of concert and show programs, - landscape lighting. All Arlight products have certificates of compliance with TR CU (EAC). Advanced production technologies, the use of the most reliable components, as well as quality control of each batch of goods ensure a long service life of Arlight products. The main priorities of the brand are:
1.Safety
2.Efficiency
3. Quality and reliability
4. Comprehensive approach Arlight is actively developing a network of Partners throughout the Russian Federation and CIS.
INTELLIGENT ARLIGHT, Dimmer DALI-104-IP67-SUF
Waterproof (IP67) 4-channel dimmer for controlling multicolor RGBW LED strip in DALI protocol. The device has a DALI input signal, 1 address and is compatible with all power supplies and panels with DALI output of Arlight and Intelligent Arlight brand. The dimmer is controlled by buttons on the housing and mode information is shown on the digital display. The degree of protection of the device allows its use in humid conditions with short-term submersion under water.
ARLIGHT ARPV-24100-B1 Power Supply Unit
The voltage source with galvanic isolation is used to power various types of LED products. The metal housing has a good heat dissipation, and the high degree of moisture protection IP67 allows the device to be used both indoors and outdoors, in compliance with the rules and requirements for installation. Versatility and reliability are the main advantages of the ARPV range.
ARLIGHT ARV-SP-24030-LINEAR-PFC-DALI2-PD Power Supply Unit
3-phase track (4TR) LGD-4TR-TRACK-2000-WH-M (C) 2 m long. Luminaires are connected to the track busbar by means of a special adapter, which allows fixing the luminaire in any place of the busbar and ensuring a reliable electrical connection. The power connector and plug are purchased separately. Color differences may occur when used with other series tracks and accessories.
LED strip sealed ARLIGHT AURORA-PS-A120-16x8mm 24V Purple
3-phase track (4TR) LGD-4TR-TRACK-2000-WH-M (C) 2 m long. Luminaires are connected to the track busbar by means of a special adapter, which allows fixing the luminaire in any place of the busbar and ensuring a reliable electrical connection. The power connector and plug are purchased separately. Color differences may occur when used with other series tracks and accessories.
Profile ARLIGHT AURORA-1608-1000 ANOD
The profile is made of anodized aluminum, which makes it possible to place the profile also outdoors, and is designed for use with AURORA series sealed tape of 8x16 mm cross-section. The external dimensions of the profile are 9x14 mm and its length is 1 meter, which provides convenience and ease of installation.
Dimmer ARLIGHT
SMART-DALI (12-24V, 1x15A)
The profile is made of anodized aluminum, which makes it possible to place the profile also outdoors, and is designed for use with AURORA series sealed tape of 8x16 mm cross-section. The external dimensions of the profile are 9x14 mm and its length is 1 meter, which provides convenience and ease of installation.
Profile ARLIGHT AURORA-1608-1000 ANOD
The voltage source with galvanic isolation is used to power various types of LED products. The metal housing has a good heat dissipation, and the high degree of moisture protection IP67 allows the device to be used both indoors and outdoors, in compliance with the rules and requirements for installation. Versatility and reliability are the main advantages of the ARPV range.
LED spotlight ARLIGHT AR-LINE-1000L-48W-24V RGB-Day4000
Linear LED spotlight AR-LINE-1000L-48W-24V RGB-Day4000 (Grey, 15x45 deg, DMX512) 48W with RGB+day white (4000K) luminescence temperature is widely used for decorative illumination of buildings, as well as architectural and sculptural objects: monuments, bridges, arches etc. Special optics, installed in the spotlight, forms a light stream with a narrowly directed angle of radiation 15x45°, which creates a bright and beautiful illumination of building facades with an emphasis on architectural forms. The use of high-efficiency full-color RGBW SMD-LEDs in the spotlight allows to reproduce more than 16 million shades and saves a significant share of electricity. Aluminum housing of gray color measuring 1000x54x35 mm with a durable screen of reinforced glass and a degree of dust and moisture protection at the level of IP65 makes it possible to operate the spotlight both indoors and outdoors under a canopy, avoiding places with large accumulations of water. The power supply voltage is 24V, and control of colors, brightness and light scenarios is performed via DMX512 protocol.
ARLIGHT SMART-K25-DMX decoder
Decoder (converter) of DMX512 digital signal to PWM for controlling LED strips. The decoder can adjust the brightness of multicolor strips, turn lights on and off, control color. The decoder is compatible with control panels with DMX512 output and DMX512 controllers. Also, the decoder is controlled by buttons on the housing and mode information is shown on the digital display.
INTELLIGENT ARLIGHT Converter DALI-DMX-311
Converter of DALI signal to DMX512 digital signal, or reverse conversion of DMX512 signal to DALI. Set the conversion start address using the DIP switches on the converter housing. Supports a maximum of 64 DALI bus addresses and 512 DMX512 bus addresses. The device is powered by a voltage range of 12 to 24V.
ARLIGHT SMART-K24-DMX512 Converter (12-24V, SPI, 2.4G)
Converter of DMX512 digital signal to SPI digital signal for controlling LED strips and SPI modules. The converter can control brightness, color, light on/off. The converter is compatible with control panels with DMX512 output and DMX512 controllers, supports RDM extension, which provides two-way communication between the converter and DMX/RDM controller. Also, the converter is controlled by buttons on the chassis, and mode information is displayed on the digital display. The device is equipped with RJ-45 and XLR3 connectors, providing DMX512 signal transmission to input and output. Also, the converter provides SPI (TTL)x3 output signal and has three output ports. The power supply of the device has a voltage range from 12V to 24V and supports control of up to 1024 pixels.
LED strip sealed ARLIGHT SPI
MOONLIGHT-BLACK-TOP-G180-D25mm 12V RGB-PX2
Flexible sealed SPI (WS2815) MOONLIGHT tape in black color. It has a circular cross-section of 25×25 mm and is equipped with 180 SMD3838 LEDs per meter. The ability to change the color of the tape (RGB) allows you to choose the right shade for your lighting. The angle of emission of the ribbon is 360°, which will allow you to create unique decorative elements with it. The ribbon consumes only 21.6 W/m and operates from 12 V. It is IP65 dust and water resistant, which allows the tape to be used even in wet areas, and has a minimum bend radius of 120 mm.
ARLIGHT LED strip
COB-X840-10mm 24V RGB
LED tape COB series X840, CSP LEDs, 840 LEDs per meter, power 16 W/m. Designed for backlighting of advertising structures and shop windows. Decorative illumination of niches, decorative elements. Decorating the premises of clubs, halls, restaurants. Installation on the profile is obligatory.
INTELLIGENT ARLIGHT Dimmer SMART-DALI-104-62-ADDR-DIM-DT6-SUF
4-channel dimmer for controlling single-color LED strip in DALI DT6 protocol. The device has a DALI input signal, 4 addresses and is compatible with all Arlight and Intelligent Arlight power supplies and panels with DALI output. The dimmer is controlled by buttons on the housing and mode information is shown on the digital display.
LED strip sealed ARLIGHT MOONLIGHT-SIDE-GM192-12x17mm 24V RGBW-Day
MOONLIGHT flexible sealed tape has a cross-section of 12×17 mm and is equipped with 192 LEDs (96 pcs/m SMD3838 and 96 pcs/m SMD2216) per meter. The ability to change the color of the tape between RGB colors and daylight white allows you to choose the right shade for your lighting. The ribbon consumes only 14.4 W/m and operates from 24 V. It has IP67 dust and moisture protection class, which allows the tape to be used even in wet rooms or outdoors, and has a minimum bending radius of 60 mm (the bend itself is horizontal/SIDE).
ARLIGHT Profile
ARL-MOONLIGHT-1712-1000 ANOD
The profile is made of anodized aluminum, which makes it possible to place the profile also outdoors, and is designed for use with sealed tape MOONLIGHT cross-section 17x12 mm. The external dimensions of the profile are 18.85x14.4 mm and its length is 1 meter, which provides convenience and ease of installation.